Deepwater Aquatics DC Brushless Water Pumps

Description

[tabs][tab 1]Description[/tab] [tab 2]Details[/tab][tab 3]Videos[/tab][/tabs][tabs content][tab content 1]The Deepwater BLDC Controllable water pumps are the pinnacle of quality DC pumps for the pond, aquarium or even pool applications. These pumps offer DC or Direct Current power, while a vast majority of pumps these days are AC. DC allows you to provide the pump with variable speed control, soft start up and feed/maintenance timers. Direct current also creates more efficient and lower power consumption operation.

The Deepwater BLDC controller has 6 preset speeds which are indicated by LED indicator lights, as well as the ability to turn off the pump. Also included is the ability to put the pump into a “service” or “feed” mode which will turn off the pump for a period of 30 minutes. This is very helpful when performing water changes or maintenance to your aquarium. Our smart controller also detects a if the pump is running out of water and shuts down to prevent damage in 10 seconds.

 In the event of a power outage the pump has an internal memory which will bring the pump back to its original state after power restoration. Other features included with the smart controller for Deepwater DC pumps is the over amperage and over voltage protection, as well as low voltage and low amperage protection.

The controller design is made for performance and heat reduction. To dissipate heat, each Smart Controller comes standard with integrated heat sinks and mounting brackets. Connections are made with water resistant aviation plugs for redundancy in safety and performance. 

Controller:

• Heat Dissipating Heat Sink Design
• Speed and pause indicator LEDs
• Three button to control speed and pause
• Water-resistant power connector
• Aluminum Construction for maximum performance

Structure:

• Pump is BLDC motor driving by a sine wave controller.
• Pump body is filled with epoxy resin, a temperature controller inside to protect against over heating.
• Closed impeller is more effective, a water recycled through-hole inside rotor to reduce heat disbursement.
• Pump head is designed based on fluid mechanics to increase efficiency.
• Titanium screw for sea water use.
• Gel pump feet to decrease vibration.

Inlet and outlet mouth are threaded for easy plumbing.

[/tab content][tab content 2]

What is Inside the box

• 1 x DC Pump
• 1 x Controller
• 1 x Warranty Card
• 1 x Owners Manual

Warranty and Manual

1 Year Warranty on Pump, Rotor and Controller

2 Year Warranty Upgrades available

Product Manual

Applications:
Salt/Fresh water Aquarium, Aquaculture, SPA, Koi Pond, Swimming pool, etc..

* Deepwater Pumps have BSP threading but this will not keep you from using any standard US fittings you can find at your local hardware store. Simply use Teflon tape around the pump threads, then hand tighten the US fittings to the Pump. Be careful to not over tighten. 

Item	Size (in)	R (mm)	r (mm)	d (mm)	D (mm)
Inlet (BLDC10/15)	2	59.614	56.656	2.309	22.000
Outlet (BLDC10/15)	1 1/2	47.803	44.845	2.309	18.000
Inlet (BLDC5//8)	1 1/2	47.803	44.845	2.309	17.800
Outlet (BLDC5//8)	1 1/4	41.910	38.952	2.309	18.000

[/tab content][tab content 3][/tab content][/tabs content]